Ordering: See ordering form on back page
l Straight thermometer for measurement of temperatures in pipe-lines and
containers, mounted in immersion wells, on the outside of pipelines, in
gases and in machinery, e.g. in connection with bearings, in the LOW-
l The measuring inset is according to EN 60751.
l The protective sheath is standard of Ø6×0.5 mm stainless steel, AISI 304.
l The connecting wire is standard available in PUR and silicone.
l The standard is without connection. (compression fitting available on
l Response time (mean values) measured at velocities in:
water at 0.4 m/s: t 0.5 = 10 sec. - t 0.9 = 42 sec.
air at 3.0 m/s: t 0.5 = 24 sec.
l Recommended measuring current: max. 2 mA.
l Approvals: DNV-GL, Bureau Veritas, DNV-GL EU RO MR.